MECAFRANCE

Logo

Three-piece ball valve

Series RA with ISO mounted flange

serie-ra-iso
  • Integrated ISO mounted flange for easy automation
  • Cast iron and forged steel materials
  • Versions in carbon steel and stainless steel
  • Full and reduced bore
  • Movable middle section for an easy exchange of seats and seals
  • SWeld-on ends, plugin ends, threaded ends and flanges
  • DN-area: DN8 - DN250
  • Pressure range. PN10 - PN100, ANSI 150/300
  • Temperature range: -40 °C to +400 °C

Series R, manual ball valves

serie-r
  • Cast iron and forged steel materials
  • Versions in carbon steel and stainless steel
  • Full and reduced bore
  • Movable middle section for an easy exchange of seats and seals
  • Weld-on ends, plugin ends, threaded ends and flanges
  • DN-area: DN8 - DN250
  • Pressure range. PN10 - PN100, ANSI 150/300
  • Temperatur range: -40 °C to +400 °C

Series CA, ball valve for high pressures

serie-ca
  • Integrated ISO mounted flange for easy automation
  • forged steel materials
  • Versions in carbon steel and stainless steel
  • Full and reduced bore
  • Weld-on ends, plugin ends, threaded ends and flanges
  • DN-area: DN8 - DN50
  • Pressure range: PN 63/80/100/220
  • Temperature range: 0 °C to +65 °C

Micro-clean ball valves

micro-clean-kugelhahn
  • Forged steel and cast iron housing
  • Version in stainless steel
  • Full and reduced bore
  • Weld-on ends, OD, extended OD, Tri-clamp connection
  • Optional: electro-polishing of the housing
  • Inner surface finish: 0,2 µm < Ra < 0,8 µm
  • DN-area: DN8 - DN250
  • Pressure range: PN10 - PN100, ANSI 150/300
  • Temperature range: -60 °C to +400 °C

Ball valves with metal and carbon dense system

kugelhahn-metall-kohle-dichtung
  • Complete metal-sealing version for corrosive and abrasive media at high temperatures up to 450 °C
  • 100% Carbon sealing systems for media such as oil, thermal oil, steam, etc.
  • Both sealing systems can be fitted without any other modifications directly in all two- and three-part MECAFRANCE standard ball valves.

Cryogenic ball valves for cryogenic applications

cryo-kugelhahn
  • Cast iron and forged steel housing materials
  • Only in stainless steel
  • Full and reduced bore
  • Weld-on ends, plugin ends, threaded ends and flanges
  • With stem extension of  150 mm or 300 mm (other lengths on request)
  • In accordance with EN 1626 (on request)
  • DN-area: DN8 - DN250
  • Pressure range: PN10 - PN100, ANSi 150/300
  • Temperature range: -196 °C to +200 °C

Three-way ball valves

dreiwege-kugelhahn
  • Cast iron and forged steel housing materials
  • Versions in carbon steel and stainless steel
  • Full and reduced bore
  • Middle and lateral connections in flange, plugin welding ends, threaded ends or welded ends version
  • L-drilling, T-drilling, horizontal and vertical connections
  • DN-area: DN10 - DN200
  • Pressure range: PN10 - PN40
  • Temperature range: -60 °C to +280 °C

Floor drain valves

bodenablass-kugelhahn
  • Cast iron and forged steel housing materials
  • Only in stainless steel
  • Full bore
  • Movable middle section for an easy exchange of seats and seals
  • Intake flange: for direct welding on the tank bottom
  • Outlet flange: weld-on ends, plugin weld-on ends, threaded ends and flanges
  • Optional: polished inner and outer surfaces
  • DN-area: DN15 - DN150
  • Pressure range: PN10 - PN100
  • Temperature range: -60 °C to +200 °C

Ball valve with heating jacket

kugelhahn-heizmantel
  • Cast iron and forged steel housing materials
  • Only in stainless steel
  • Full and reduced bore
  • weld-on ends, double mortise ends, threaded end (with all-in-one heating jacket), version (with a one-piece or three-piece heating jacket)
  • All-in-one heating: only for the middle section
  • Three-part heating: for the central section including the end connections
  • Suitable for heating with steam, thermal oil, hot water
  • DN-area: DN8 - DN250
  • Pressure range: PN10 - PN100, ANSI 150/300
  • Temperature range: -40 °C to +400 °C

Micro-Clean, IPC and True-Tube™ ball valves

micro-clean
  • Cast iron and forged steel housing materials ™
  • In carbon steel and stainless steel version
  • Full and reduced bore
  • Integrated ISO mounted flange for easy automation
  • Hygienic and septic ball finishes
  • DN-area: DN15 - DN150
  • Pressure range: PN10 - PN100 in one flow direction
  • Temperature range: -20 °C to +200 °C

Print version as PDF